top of page

SAFETY INSTRUCTIONS

IMPORTANT: Read the user manual first before installing, using, or maintaining the display. Save the user manual in a safe place for future reference.

WARNING: Install the product properly to avoid dropping and damaging the display. Store or use the display in a safe location.

WARNING: The power supply cord should be connected to a socket-outlet with an earthing connection.

WARNING: Disconnect the AC power cord before opening the unit to install features or service the product. Do not connect or disconnect any peripheral while the product is connected to AC power. This can result in system damage.

WARNING: Wear a good electrostatic wrist strap that is close to the skin when replacing parts.

WARNING: Lead-free soldering iron is controlled at 350-380 degrees.

WARNING: When repairing, ensure the board or display should not be damaged.

WARNING: After repair, check whether the cable is loose and whether the white glue is applied.

WARNING: Operate the product only within -30 °C to 60 °C. 

WARNING: Avoid collision of the display with other objects.

WARNING: Avoid leaking or dropping liquid to the touch screen that may cause damage and malfunction to the display. 

WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type as recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.

WARNING: Do not overload the electric socket; it may cause fire or explosion. Be cautious of whether the local voltage is compatible with the power adaptor input voltage.

WARNING: Repair or replace damaged or worn cords immediately.

WARNING: Avoid pulling the power cord when unplugging the display. Carefully disconnect the cable from the port to prevent damage to your power cord.

bottom of page