top of page

Search Results

58 items found for ""

  • VEGAOS OUTDOOR | Glory Star Guide

    Copyright & Disclaimer VegaOS Outdoor Overview Accessing the App Accessing through Device Accessing through Web Console Updating Web Console Login Details Configuring General Settings Viewing Basic Information Setting the Device Name Selecting a Language Updating VegaOS and Firmware Version Exporting System Logs Updating the Display Settings Adjusting the Screen Brightness Setting Time or Time Zone Setting the Screensaver Displaying Time on Screensaver Assigning Light Strip Colors Setting Building Information Synchronizing Time Adjusting the Sound Settings Configuring the Dial & Call Settings Setting the Call Settings Downloading or Clearing Call Logs Registering the SIP Server Updating Contacts Viewing and Editing Contacts Adding New Contact Adding Robin Group Configuring RFID Card Changing Access PIN Setting the Front Desk Units Connecting to Star Control VegaOS Outdoor PDF VEGAOS OUTDOOR ADMINISTRATOR GUIDE PRODUCT OVERVIEW Use the VegaOS app to configure Vega X intercom system outdoor touchscreen to set your preferred call, display, sound, contacts, and RFID settings. The configurations apply to the VegaOS 1.6.3 version and provide information in configuring the functions and features of the VEGA X Intercom System. You can access the app through the device directly or through the web console. The following functions can only be configured through the web console. Enabling RFID Uploading Media Playlist Setting Building Icon and Background Image Synchronizing Time with a Server Registering SIP Server Access the VegaOS App Update the Display Settings Configure Dial & Call Settings Configure RFID Card Set Front Desk Units Configure General Settings Update the Sound Settings Update Contacts Change Access PIN Connect to Star Control

  • Nebula Plus Product Overview | Glory Star Guide

    Copyright & Disclaimer Safety Instructions Nebula Plus Product Overview Nebula Plus Features Nebula Plus Product Specifications Nebula Plus Input/Output Ports Nebula Plus Dimensions Nebula Plus Label Location Nebula Plus Installation and Setup Nebula Plus Connecting to Power RFID/NFC 1D/2D Barcode Scanner Light Strips Mount STAROS STAR TOOL STAR CONTROL Nebula Plus User Manual PDF PRODUCT OVERVIEW The Nebula Plus computer tablet is the next generation of tablets for industry use. It comes with a curved edge touch glass. It has the most versatile application for rigorous and continuous public use of self service, corporate, healthcare, in-store interaction, and hospitality environments. The RFID, barcode reader, and camera can be attached to Nebula Plus to enhance your user experience. The voice quality has been improved to avoid surround noise when using next-generation of voice control activations. Nebula Plus combines commercial-grade reliability with the powerful Hexacore processor, PCAP 10-touch display, Android 12 .0, StarOS 10.2.1, and optional Power-over-Ethernet (POE) – all in a compact responsive all-in-one (AiO) computer. Staros, our license free kiosk lockdown app, is inclusive with Nebula Plus. Star Control, a secure platform, could be added as an option to remotely access the tablets for content and device management. FEATURES Pairing to human eyes, responds to light with ambient and proximity sensor Dual mic with echo cancellation algorithm for crystal-clear calls Seamless bonded panel for high clarity and instant response Custom design speaker for crisp and wide stereo sound High brightness panel at 500 Nits Curved glass posh design PRODUCT SPECIFICATIONS OP TIONAL PERIPHERALS

  • STAR CONTROL | Glory Star Guide

    Copyright & Disclaimer Star Control Overview Features Accessing the App Creating New Account Logging into an Account Navigating the App Viewing the Dashboard Managing Devices Registering Devices Managing a Specific Device Running Apps, Photos, Videos, or Website Restarting Device Adding Device to Device Groups Assigning Device to Staff Scheduling Device Reboot Installing or Uninstalling APKs Updating Firmware Taking and Viewing Screenshots Recording or Viewing Logs Adjusting Volume Adjusting Screen Brightness Setting Password Setting Display Time-out Creating Device Groups Accessing Device Remotely Cloud Infrastructure and IP Ports Managing Files Managing Library Uploading Files Creating Content to Display Creating Preset Content Managing Staff Accounts Creating New Staff Account Updating Staff Profile Deactivating or Deleting Staff Account Assigning Device to Staff Setting Staff Account Permissions Generating Staff Actvities Report Viewing License Records Star Control 2.0 User Manual STAR CONTROL 2.0 USER MANUAL PRODUCT OVERVIEW Star Control Device Management is a secure platform that provides visibility and allows management of your entire network of Android-powered tablets and kiosks from anywhere around the world. Star Control Device Management solution allows you to manage or remove the apps installed on devices, deploy content, monitor or configure the settings, and set up devices to reduce operating cost. Simply push your apps and responsive websites via the Star Control MDM Device Management Platform. Star Control Overview Manage Devices Manage Device Files Manage Staff Accounts

  • Nebula Glow Installation and Setup | Glory Star Guide

    Copyright & Disclaimer Safety Instructions Nebula Glow Product Overview Nebula Glow Features Nebula Glow Product Specifications Nebula Glow Input/Output Ports Nebula Glow Label Locations Nebula Glow Dimensions Nebula Glow Installation and Setup STAROS STAR TOOL STAR CONTROL Nebula Glow User Manual PDF INSTALLATION AND SETUP Select a preferred configuration for the display before installing the product and setting it up for use. CAUTION: Follow the installation instructions properly to avoid dropping and damaging the display. CONFIGURATIONS UNPACKING THE BOX Out of the Box Failure If you experience an out of box failure (OBF) during installation in relation to missing, incorrect, or defective unit or item, send an email to support@glorystargroup.com and provide a description of the issue. Glory Star will first troubleshoot the problem over phone or video to help resolve the issue. If Glory Star determines that a product or component has to be returned to the factory, it will instruct the customer how to remove the components from the product. CONNECTING TO POWER To power up the tablet, perform the following steps: 1. Remove the two screws that secure the back cover lid. 2. Remove the back cover lid. 3. Connect the DC power connector to the DC IN port. NOTE: The L-shaped plug should be placed on the left side. 4. Install the back cover lid and secure with two screws. INSTALLING MODULES You can install the following modules to the computer tablet: • RFID/NFC – automatically identifies persons and conducts access management and mobile payments • 1D/2D Barcode Scanner – scans printed barcodes and captures data information RFID/NFC To install the RFID to your tablet, perform the following steps: 1. Secure the RFID/NFC mount with two screws. 2. Secure the RFID/NFC with two screws. 3. Connect the RFID/NFC module to a USB Type C port on the tablet. 4. Install the back cover lid and secure with two screws. CONFIGURING RFID FOR TOUCH SCREEN DEVICES 1. Launch the Star Tool app. 2. From the Addon Modules category, select Enter . 3. Select RFID module . 4. Hover an RFID card on the RFID module, and then select Scan card . The Card type and Card ID are displayed. 5. To change the RFID value, type an RFID value , and then select Write value . 6. Select Read card to check new RFID card value. 1D/2D BARCODE SCANNER To install the 1D/2D barcode scanner to your tablet, perform the following steps: 1. Secure the barcode scanner mount with two screws. 2. Secure the barcode scanner with two screws. 3. Connect the barcode scanner to a USB Type A port of the tablet. 4. Install the back cover lid and secure with two screws. CONFIGURING MODULE 1. Launch the Star Tool app. 2. From the Addon Modules category, select Enter . 3. Select Barcode modules . 4. Select the installed barcode scanner. 5. Select Keyboard or Serial as the input mode for barcodes. The barcode displays in the Scanned output field. 6. Select one of the following: • Light modes On – always turns on the barcode scanner light. • Light modes Auto – turns on the barcode scanner light when it detects a barcode to scan. • Light modes Off – turns off the barcode scanner light. 7. To add a line break after scanning a barcode, enable Automatically return . 8. To add a beep sound after scanning a barcode, enable Sound notification . 9. To view the list of 1D and 2D supported barcodes, select the format type under Supported format . WALL MOUNT You can purchase the Wall Mount accessory to mount the display on a concrete or wooden wall. To mount the display on the wall, follow these steps: 1. Disconnect the AC power adaptor from the power source to turn off the display. 2. Lay the display face down on a flat surface. CAUTION: Always use a soft material, cloth or foam, to protect the display when placing the screen face down. 3. Mount the monitor bracket at the back of the display. Secure the bracket with four M4x12 bolts and washers. 4. Place the wall plate on the wall and mark the four mounting holes. 5. Perform one of the following: • For a concrete wall, drill four 8 mm holes on the concrete wall, and insert an anchor into each hole. • For wooden mount, drill two 3.8 mm holes on the wood, and insert an anchor into each hole. 6. Align the wall plate with the mounting holes. Secure the plate to the wall with lag bolts and log bolt washers. CONCRETE WALL WOODEN WALL 7. Align the display with the wall plate, and then carefully slide down the display until the bracket is safely secured to the wall plate. 8. Secure the bracket to the wall plate with two M5x15 bolts and M5 washers. 9. Plug the AC power adaptor into a power source to turn on the display. FIX-028 TABLE MOUNT ​ To install the FIX-028 table mount to the display, follow these steps: 1. Disconnect the AC power adaptor from the power source to turn off the display. 2. Pull up the stand from the base and the VESA plate from the stand. ​3. Lay the display face down on a flat surface. CAUTION : Always use a soft material, cloth or foam, to protect the display when placing the screen face down. 4. Mount the VESA plate at the back of the display. Secure the VESA plate with four M4x12 bolts and washers. 5. Set the display in an upright position. 6. Connect the AC power adaptor into a power source to turn on the display.

  • TOUCHSCREEN INCOMING MATERIAL INSPECTION INSTRUCTIONS | Glory Star Guide

    < Back TOUCHSCREEN INSPECTION: Function Specification Inspection Reference Inspection Level Parts for Inspection Inspection Steps 1. Delivery Check 2. Dimensions Check 3. Appearance Check 4. Back Adhesive Inspection 5. Firmware Version 6. Performance Test 7. Label Package PDF TOUCHSCREEN INCOMING MATERIAL INSPECTION INSTRUCTIONS 触摸屏来料检验操作说明 Use the following instructions to inspect the touchscreen in all sizes. The 15.6 inch touchscreen is used as an example. 使用15.6英寸触摸屏为例检查說明 , 適用於所有尺寸的触摸屏. Function Specification 1. FUNCTION SPECIFICATION 功能介绍 Inspectiion Reference 2. INSPECTION REFERENCE 检测判定依据 Refer to the ISO9001-2015 Control Document: Touchscreen Testing Standard (Doc No. GS-QC-WI-15-A4). 参考ISO9001-2015授控文件: 触摸屏检测标准书(编号: GS-QC-WI-15-A4). 3. INSPECTION LEVEL 检测级别 Inspection Level MIL-STD-105E , Level Ⅱ , Critical : 0 Major : 0.65 Minor : 1.5 按MIL-STD-105E表,一般水准Ⅱ,CRI:0 MAJ:0.65 MIN:1.5 Temperature: 20 ~ 30℃; Humidity: 60 ~ 70% RH; Luminous flux: 300~700 LM (LUX) 温度:20~30℃;湿度:60~70%RH;光通量:300~700流明(LUX) Distance: 30~40CM; Angle: perpendicular to the panel, up, down, left, right, rotating 60 degrees. 检验距离:30~40CM;检验角度:垂直于面板,向上,下 , 左,右,转动60度 4. PARTS FOR INSPECTION 检验工具 Parts Inspection Motherboard (Android System) 安卓主板 15.6” IPS display panel 1920 x 1080 15.6 寸显示屏 Display Cable 屏线 10-pin Reverse Touch Cable 反向10PIN TP线 4-pin Connector to USB-A Cable 4PIN转USB公头线材 12V / 5A Adapter 12V/5A适配器 Computer ( Windows system ) 计算机 ( Windows System ) Touchscreen Specification 触控屏规格书 Inspection Steps 5. INSPECTION STEPS 测试步骤 5.1 DELIVERY CHECK 交货检查: Delivery Check Receive the incoming delivery note. Look for the sealed samples and touchscreen specifications and check whether the supplied materials are consistent with the specifications. 收到来料送货单 , 寻找封样及规格书 ,核对来料与样品 ,规格书是否一致. 5.2 DIMENSIONS CHECK 尺寸检验: Dimensions Check Measure the length, width, and height using a caliper. Actual dimensionsmust match with theindicated specifications. The maximum allowable tolerance of the actual dimensions should only be ± 0.1. 尺寸检验:用卡尺测量长, 宽,高尺寸必须符合规格书参数要求,超出公差范围可进行实配确认,同一片玻璃厚溥差为±0.1. Appearance Check 5.3 APPEARANCE CHECK 外观检查: Check if the touchscreen samples have the following issues and refer to the inspection form. 检查触摸屏样品是否有以下问题,并参考检查表 Scratches and dirt on the surface 表面的划痕和污垢 Silk print ink is not normal 丝印不正常 Corners have broken edges 边角有折断的边缘 Metal connection position of FPC cable has oxidation 表面的划痕和污垢 Creases 刮痕 Holes in the lens or mic 镜头,Mic的孔 FPC Cable Damaged 破损 Air Bell 气泡 Camera Hole Deformation 变形破损 Scratched 刮伤 Damaged 破损 背胶检验: 5.4 BACK ADHESIVE INSPECTION Back Adhesive Inspection Check whether TP is pasted with adhesive. The thickness, viscosity, material, and process of adhesion should be consistent with the sample. If there is no physical sample, viscosity test should be conducted. 检验 Touchscreen是否贴有背胶, 背胶厚度, 粘性,材质、工艺需要与样品一致; 无实物样品的应进行粘性测试. 5.5 FIRMWARE VERSION 控制卡软件确认: Firmware Version Use a 4-Pin to USB male cable to connect the FPC cable metal terminal connection control card to a computer. Open ILITEK TP Tools , select Console , and then check if the indicated Firmware Version is the current version used by the company. Touchscreen端连接控制卡用4PIN转USB公头线连接到电脑,打开Ilitek TP Tool工具,点击Console,读取版本号,版本要与封样软件一致. Performance Test 性能测试: 5.6 PERFORMANCE TEST Touchscreen/Display/Motherboard/Touch Panel(TP) Control Board Connection Test 触摸屏/显示器/主板/触摸屏 (TP) 控制板连接测试 A. The platform uses an Android motherboard with firmware. Check that the voltage of the motherboard is measured at 3.3V when connected to the display and thecontrol panel board. 搭平台使用安卓主板带有固件,主板屏电压跳帽至3.3V,连接15.6寸显示屏, 屏线连接主板(下接)和显示屏. B. Check that the FPC cable at the TP end is connected to the control card, and it needs to be connected in place. The cable cannot be inserted at an angle or inclined. Touchscreen 端FPC排线连接控制卡,需连接到位,不可插偏, 倾斜. C. Use a 10-Pin reverse cable to connect the control card and the main board with the metal side down. After all connections are completed, check whether there are incorrect connections. The components must not collide. 10 PIN反向线连接控制卡与主板端,下接金属面向下,所有接通完毕检查有无接错, 元器件不可碰撞,确认无误后接通电源开机. D. Star Tool Pre-Aging Test for Touch 开始测试触摸 1. Install the test APK on the motherboard. 主板上安装测试APK 2. Open Star Tool , and then select Burn-In Test . 打开Startool点击老化测试选项 3. Select Test before burn-in . 点击老化前测试 4. Select Touch , select Start Test , and then enter the next item. 点击触摸开始测试进入下一项 5. Check whether the touch line is normal, no disconnection or jumping point. Place your 10 fingers on the touchscreen at the same time to confirm 10-point touch. 触摸划线正常,无断线、跳点,10指同时放在触摸屏上,确认是否为10点触摸. E. Touch Wake Test 触摸唤醒测试 1. Select Settings →Display →Sleep →15 seconds . 打开Setting设置→点击Display→点击Sleep→选择15秒 2. After the screen is completely black, wait for about 10 seconds, and then touch the screen continuously. 待屏幕完全黑屏后等待10S左右 3. Check that the screen display is working normally. 连续点击屏幕显示正常 Label Package 5.7 LABEL PACKAGE 标签包装: After the test is completed, turn off the display, remove the control card and TP cable, and then place the parts carefully back into the package. Attach a qualified label, and then send it back to the warehouse. If a package has an issue, notify the supervisor. ​ 取下控制卡,连接线,将Touchscreen放置箱子内. 貼上合格標籤,而後送到倉庫不良來料區分 , 通知主管. 5.8 SUBMIT REPORT 提交报告: Submit Report Log in to K3 system and fill in the incoming inspection report. K3并填写来料检验报告。

  • STAR TOOL | Glory Star Guide

    Copyright & Disclaimer Product Overview Downloading Star Tool Features Performing Diagnostics General Functionalities Getting Device Information Installing OTA Update Accessing Source Code Adjusting Screen Brightness and Volume Setting Display Orientation Taking Screenshots Restarting the Device Remotely Unlocking Star Tool Performing Model Specific Tests Light Strips Buttons GPIO UART Wiegand Interface Sensors RS485 Input Port 1&2 Camera RFID Configuring Add-on Modules Barcode Modules Camera RFID Light Strips Performing Aging Tests Pre-Aging Test W-Fi HDMI Screen Display Gyroscope Network USB Touch Buttons Bluetooth SD Port Speaker Photo & Recording Aging Test Star Tool 1.6 User Manual PDF STAR TOOL 1.6 USER MANUAL PRODUCT OVERVIEW Star Tool is an open-source APK file that provides diagnostic and functional tests for Glory Star devices. It checks whether the product’s hardware or software is working properly. Star Tool is also designed for developers to use in customizing the displays and modules. Using the tool, the hardware can be configured using the developer’s software platform. General Functionalities Configure Add-on Modules Perform Models Specific Tests Perform Aging Tests

  • TOUCHSCREEN INCOMING MATERIAL INSPECTION INSTRUCTIONS

    < Back TOUCHSCREEN INSPECTION: Function Specification Inspection Reference Inspection Level Parts for Inspection Inspection Steps 1. Delivery Check 2. Dimensions Check 3. Appearance Check 4. Back Adhesive Inspection 5. Firmware Version 6. Performance Test 7. Label Package PDF TOUCHSCREEN INCOMING MATERIAL INSPECTION INSTRUCTIONS 触摸屏来料检验操作说明 Use the following instructions to inspect the touchscreen in all sizes. The 15.6 inch touchscreen is used as an example. 使用15.6英寸触摸屏为例检查說明 , 適用於所有尺寸的触摸屏. Function Specification 1. FUNCTION SPECIFICATION 功能介绍 Inspectiion Reference 2. INSPECTION REFERENCE 检测判定依据 Refer to the ISO9001-2015 Control Document: Touchscreen Testing Standard (Doc No. GS-QC-WI-15-A4). 参考ISO9001-2015授控文件: 触摸屏检测标准书(编号: GS-QC-WI-15-A4). 3. INSPECTION LEVEL 检测级别 Inspection Level MIL-STD-105E , Level Ⅱ , Critical : 0 Major : 0.65 Minor : 1.5 按MIL-STD-105E表,一般水准Ⅱ,CRI:0 MAJ:0.65 MIN:1.5 Temperature: 20 ~ 30℃; Humidity: 60 ~ 70% RH; Luminous flux: 300~700 LM (LUX) 温度:20~30℃;湿度:60~70%RH;光通量:300~700流明(LUX) Distance: 30~40CM; Angle: perpendicular to the panel, up, down, left, right, rotating 60 degrees. 检验距离:30~40CM;检验角度:垂直于面板,向上,下 , 左,右,转动60度 4. PARTS FOR INSPECTION 检验工具 Parts Inspection Motherboard (Android System) 安卓主板 15.6” IPS display panel 1920 x 1080 15.6 寸显示屏 Display Cable 屏线 10-pin Reverse Touch Cable 反向10PIN TP线 4-pin Connector to USB-A Cable 4PIN转USB公头线材 12V / 5A Adapter 12V/5A适配器 Computer ( Windows system ) 计算机 ( Windows System ) Touchscreen Specification 触控屏规格书 Inspection Steps 5. INSPECTION STEPS 测试步骤 5.1 DELIVERY CHECK 交货检查: Delivery Check Receive the incoming delivery note. Look for the sealed samples and touchscreen specifications and check whether the supplied materials are consistent with the specifications. 收到来料送货单 , 寻找封样及规格书 ,核对来料与样品 ,规格书是否一致. 5.2 DIMENSIONS CHECK 尺寸检验: Dimensions Check Measure the length, width, and height using a caliper. Actual dimensionsmust match with theindicated specifications. The maximum allowable tolerance of the actual dimensions should only be ± 0.1. 尺寸检验:用卡尺测量长, 宽,高尺寸必须符合规格书参数要求,超出公差范围可进行实配确认,同一片玻璃厚溥差为±0.1. Appearance Check 5.3 APPEARANCE CHECK 外观检查: Check if the touchscreen samples have the following issues and refer to the inspection form. 检查触摸屏样品是否有以下问题,并参考检查表 Scratches and dirt on the surface 表面的划痕和污垢 Silk print ink is not normal 丝印不正常 Corners have broken edges 边角有折断的边缘 Metal connection position of FPC cable has oxidation 表面的划痕和污垢 Creases 刮痕 Holes in the lens or mic 镜头,Mic的孔 FPC Cable Damaged 破损 Air Bell 气泡 Camera Hole Deformation 变形破损 Scratched 刮伤 Damaged 破损 背胶检验: 5.4 BACK ADHESIVE INSPECTION Back Adhesive Inspection Check whether TP is pasted with adhesive. The thickness, viscosity, material, and process of adhesion should be consistent with the sample. If there is no physical sample, viscosity test should be conducted. 检验 Touchscreen是否贴有背胶, 背胶厚度, 粘性,材质、工艺需要与样品一致; 无实物样品的应进行粘性测试. 5.5 FIRMWARE VERSION 控制卡软件确认: Firmware Version Use a 4-Pin to USB male cable to connect the FPC cable metal terminal connection control card to a computer. Open ILITEK TP Tools , select Console , and then check if the indicated Firmware Version is the current version used by the company. Touchscreen端连接控制卡用4PIN转USB公头线连接到电脑,打开Ilitek TP Tool工具,点击Console,读取版本号,版本要与封样软件一致. Performance Test 性能测试: 5.6 PERFORMANCE TEST Touchscreen/Display/Motherboard/Touch Panel(TP) Control Board Connection Test 触摸屏/显示器/主板/触摸屏 (TP) 控制板连接测试 A. The platform uses an Android motherboard with firmware. Check that the voltage of the motherboard is measured at 3.3V when connected to the display and thecontrol panel board. 搭平台使用安卓主板带有固件,主板屏电压跳帽至3.3V,连接15.6寸显示屏, 屏线连接主板(下接)和显示屏. B. Check that the FPC cable at the TP end is connected to the control card, and it needs to be connected in place. The cable cannot be inserted at an angle or inclined. Touchscreen 端FPC排线连接控制卡,需连接到位,不可插偏, 倾斜. C. Use a 10-Pin reverse cable to connect the control card and the main board with the metal side down. After all connections are completed, check whether there are incorrect connections. The components must not collide. 10 PIN反向线连接控制卡与主板端,下接金属面向下,所有接通完毕检查有无接错, 元器件不可碰撞,确认无误后接通电源开机. D. Star Tool Pre-Aging Test for Touch 开始测试触摸 1. Install the test APK on the motherboard. 主板上安装测试APK 2. Open Star Tool , and then select Burn-In Test . 打开Startool点击老化测试选项 3. Select Test before burn-in . 点击老化前测试 4. Select Touch , select Start Test , and then enter the next item. 点击触摸开始测试进入下一项 5. Check whether the touch line is normal, no disconnection or jumping point. Place your 10 fingers on the touchscreen at the same time to confirm 10-point touch. 触摸划线正常,无断线、跳点,10指同时放在触摸屏上,确认是否为10点触摸. E. Touch Wake Test 触摸唤醒测试 1. Select Settings →Display →Sleep →15 seconds . 打开Setting设置→点击Display→点击Sleep→选择15秒 2. After the screen is completely black, wait for about 10 seconds, and then touch the screen continuously. 待屏幕完全黑屏后等待10S左右 3. Check that the screen display is working normally. 连续点击屏幕显示正常 Label Package 5.7 LABEL PACKAGE 标签包装: After the test is completed, turn off the display, remove the control card and TP cable, and then place the parts carefully back into the package. Attach a qualified label, and then send it back to the warehouse. If a package has an issue, notify the supervisor. ​ 取下控制卡,连接线,将Touchscreen放置箱子内. 貼上合格標籤,而後送到倉庫不良來料區分 , 通知主管. 5.8 SUBMIT REPORT 提交报告: Submit Report Log in to K3 system and fill in the incoming inspection report. K3并填写来料检验报告。

  • CABLE MATERIAL INSPECTION INSTRUCTIONS

    < Back TOUCHSCREEN INSPECTION: Function Specification Inspection Reference Inspection Level Parts for Inspection Inspection Steps 1. Delivery Check 2. Dimensions Check 3. Appearance Check 4. Back Adhesive Inspection 5. Firmware Version 6. Performance Test 7. Label Package PDF CABLE MATERIAL INSPECTION INSTRUCTIONS 触摸屏来料检验操作说明 Use the following instructions to inspect the touchscreen in all sizes. The 15.6 inch touchscreen is used as an example. 使用15.6英寸触摸屏为例检查說明 , 適用於所有尺寸的触摸屏. Function Specification 1. FUNCTION SPECIFICATION 功能介绍 Inspectiion Reference 2. INSPECTION REFERENCE 检测判定依据 Refer to the ISO9001-2015 Control Document: Touchscreen Testing Standard (Doc No. GS-QC-WI-15-A4). 参考ISO9001-2015授控文件: 触摸屏检测标准书(编号: GS-QC-WI-15-A4). 3. INSPECTION LEVEL 检测级别 Inspection Level MIL-STD-105E , Level Ⅱ , Critical : 0 Major : 0.65 Minor : 1.5 按MIL-STD-105E表,一般水准Ⅱ,CRI:0 MAJ:0.65 MIN:1.5 Temperature: 20 ~ 30℃; Humidity: 60 ~ 70% RH; Luminous flux: 300~700 LM (LUX) 温度:20~30℃;湿度:60~70%RH;光通量:300~700流明(LUX) Distance: 30~40CM; Angle: perpendicular to the panel, up, down, left, right, rotating 60 degrees. 检验距离:30~40CM;检验角度:垂直于面板,向上,下 , 左,右,转动60度 4. PARTS FOR INSPECTION 检验工具 Parts Inspection Motherboard (Android System) 安卓主板 15.6” IPS display panel 1920 x 1080 15.6 寸显示屏 Display Cable 屏线 10-pin Reverse Touch Cable 反向10PIN TP线 4-pin Connector to USB-A Cable 4PIN转USB公头线材 12V / 5A Adapter 12V/5A适配器 Computer ( Windows system ) 计算机 ( Windows System ) Touchscreen Specification 触控屏规格书 Inspection Steps 5. INSPECTION STEPS 测试步骤 5.1 DELIVERY CHECK 交货检查: Delivery Check Receive the incoming delivery note. Look for the sealed samples and touchscreen specifications and check whether the supplied materials are consistent with the specifications. 收到来料送货单 , 寻找封样及规格书 ,核对来料与样品 ,规格书是否一致. 5.2 DIMENSIONS CHECK 尺寸检验: Dimensions Check Measure the length, width, and height using a caliper. Actual dimensionsmust match with theindicated specifications. The maximum allowable tolerance of the actual dimensions should only be ± 0.1. 尺寸检验:用卡尺测量长, 宽,高尺寸必须符合规格书参数要求,超出公差范围可进行实配确认,同一片玻璃厚溥差为±0.1. Appearance Check 5.3 APPEARANCE CHECK 外观检查: Check if the touchscreen samples have the following issues and refer to the inspection form. 检查触摸屏样品是否有以下问题,并参考检查表 Scratches and dirt on the surface 表面的划痕和污垢 Silk print ink is not normal 丝印不正常 Corners have broken edges 边角有折断的边缘 Metal connection position of FPC cable has oxidation 表面的划痕和污垢 Creases 刮痕 Holes in the lens or mic 镜头,Mic的孔 FPC Cable Damaged 破损 Air Bell 气泡 Camera Hole Deformation 变形破损 Scratched 刮伤 Damaged 破损 背胶检验: 5.4 BACK ADHESIVE INSPECTION Back Adhesive Inspection Check whether TP is pasted with adhesive. The thickness, viscosity, material, and process of adhesion should be consistent with the sample. If there is no physical sample, viscosity test should be conducted. 检验 Touchscreen是否贴有背胶, 背胶厚度, 粘性,材质、工艺需要与样品一致; 无实物样品的应进行粘性测试. 5.5 FIRMWARE VERSION 控制卡软件确认: Firmware Version Use a 4-Pin to USB male cable to connect the FPC cable metal terminal connection control card to a computer. Open ILITEK TP Tools , select Console , and then check if the indicated Firmware Version is the current version used by the company. Touchscreen端连接控制卡用4PIN转USB公头线连接到电脑,打开Ilitek TP Tool工具,点击Console,读取版本号,版本要与封样软件一致. Performance Test 性能测试: 5.6 PERFORMANCE TEST Touchscreen/Display/Motherboard/Touch Panel(TP) Control Board Connection Test 触摸屏/显示器/主板/触摸屏 (TP) 控制板连接测试 A. The platform uses an Android motherboard with firmware. Check that the voltage of the motherboard is measured at 3.3V when connected to the display and thecontrol panel board. 搭平台使用安卓主板带有固件,主板屏电压跳帽至3.3V,连接15.6寸显示屏, 屏线连接主板(下接)和显示屏. B. Check that the FPC cable at the TP end is connected to the control card, and it needs to be connected in place. The cable cannot be inserted at an angle or inclined. Touchscreen 端FPC排线连接控制卡,需连接到位,不可插偏, 倾斜. C. Use a 10-Pin reverse cable to connect the control card and the main board with the metal side down. After all connections are completed, check whether there are incorrect connections. The components must not collide. 10 PIN反向线连接控制卡与主板端,下接金属面向下,所有接通完毕检查有无接错, 元器件不可碰撞,确认无误后接通电源开机. D. Star Tool Pre-Aging Test for Touch 开始测试触摸 1. Install the test APK on the motherboard. 主板上安装测试APK 2. Open Star Tool , and then select Burn-In Test . 打开Startool点击老化测试选项 3. Select Test before burn-in . 点击老化前测试 4. Select Touch , select Start Test , and then enter the next item. 点击触摸开始测试进入下一项 5. Check whether the touch line is normal, no disconnection or jumping point. Place your 10 fingers on the touchscreen at the same time to confirm 10-point touch. 触摸划线正常,无断线、跳点,10指同时放在触摸屏上,确认是否为10点触摸. E. Touch Wake Test 触摸唤醒测试 1. Select Settings →Display →Sleep →15 seconds . 打开Setting设置→点击Display→点击Sleep→选择15秒 2. After the screen is completely black, wait for about 10 seconds, and then touch the screen continuously. 待屏幕完全黑屏后等待10S左右 3. Check that the screen display is working normally. 连续点击屏幕显示正常 Label Package 5.7 LABEL PACKAGE 标签包装: After the test is completed, turn off the display, remove the control card and TP cable, and then place the parts carefully back into the package. Attach a qualified label, and then send it back to the warehouse. If a package has an issue, notify the supervisor. ​ 取下控制卡,连接线,将Touchscreen放置箱子内. 貼上合格標籤,而後送到倉庫不良來料區分 , 通知主管. 5.8 SUBMIT REPORT 提交报告: Submit Report Log in to K3 system and fill in the incoming inspection report. K3并填写来料检验报告。

  • TOUCHSCREEN INCOMING MATERIAL INSPECTION INSTRUCTIONS

    < Back TOUCHSCREEN INSPECTION: Function Specification Inspection Reference Inspection Level Parts for Inspection Inspection Steps 1. Delivery Check 2. Dimensions Check 3. Appearance Check 4. Back Adhesive Inspection 5. Firmware Version 6. Performance Test 7. Label Package PDF TOUCHSCREEN INCOMING MATERIAL INSPECTION INSTRUCTIONS 触摸屏来料检验操作说明 Use the following instructions to inspect the touchscreen in all sizes. The 15.6 inch touchscreen is used as an example. 使用15.6英寸触摸屏为例检查說明 , 適用於所有尺寸的触摸屏. Function Specification 1. FUNCTION SPECIFICATION 功能介绍 2. INSPECTION REFERENCE 检测判定依据 Inspectiion Reference Refer to the ISO9001-2015 Control Document: Touchscreen Testing Standard (Doc No. GS-QC-WI-15-A4). 参考ISO9001-2015授控文件: 触摸屏检测标准书(编号: GS-QC-WI-15-A4). 3. INSPECTION LEVEL 检测级别 Inspection Level MIL-STD-105E , Level Ⅱ , Critical : 0 Major : 0.65 Minor : 1.5 按MIL-STD-105E表,一般水准Ⅱ,CRI:0 MAJ:0.65 MIN:1.5 Temperature: 20 ~ 30℃; Humidity: 60 ~ 70% RH; Luminous flux: 300~700 LM (LUX) 温度:20~30℃;湿度:60~70%RH;光通量:300~700流明(LUX) Distance: 30~40CM; Angle: perpendicular to the panel, up, down, left, right, rotating 60 degrees. 检验距离:30~40CM;检验角度:垂直于面板,向上,下 , 左,右,转动60度 4. PARTS FOR INSPECTION 检验工具 Parts Inspection Motherboard (Android System) 安卓主板 15.6” IPS display panel 1920 x 1080 15.6 寸显示屏 Display Cable 屏线 10-pin Reverse Touch Cable 反向10PIN TP线 4-pin Connector to USB-A Cable 4PIN转USB公头线材 12V / 5A Adapter 12V/5A适配器 Computer ( Windows system ) 计算机 ( Windows System ) Touchscreen Specification 触控屏规格书 Inspection Steps 5. INSPECTION STEPS 测试步骤 5.1 DELIVERY CHECK 交货检查: Delivery Check Receive the incoming delivery note. Look for the sealed samples and touchscreen specifications and check whether the supplied materials are consistent with the specifications. 收到来料送货单 , 寻找封样及规格书 ,核对来料与样品 ,规格书是否一致. 5.2 DIMENSIONS CHECK 尺寸检验: Dimensions Check Measure the length, width, and height using a caliper. Actual dimensionsmust match with theindicated specifications. The maximum allowable tolerance of the actual dimensions should only be ± 0.1. 尺寸检验:用卡尺测量长, 宽,高尺寸必须符合规格书参数要求,超出公差范围可进行实配确认,同一片玻璃厚溥差为±0.1. 5.3 APPEARANCE CHECK 外观检查: Appearance Check Check if the touchscreen samples have the following issues and refer to the inspection form. 检查触摸屏样品是否有以下问题,并参考检查表 Scratches and dirt on the surface 表面的划痕和污垢 Silk print ink is not normal 丝印不正常 Corners have broken edges 边角有折断的边缘 Metal connection position of FPC cable has oxidation 表面的划痕和污垢 Creases 刮痕 Holes in the lens or mic 镜头,Mic的孔 FPC Cable Damaged 破损 Air Bell 气泡 Camera Hole Deformation 变形破损 Scratched 刮伤 Damaged 破损 背胶检验: 5.4 BACK ADHESIVE INSPECTION Back Adhesive Inspection Check whether TP is pasted with adhesive. The thickness, viscosity, material, and process of adhesion should be consistent with the sample. If there is no physical sample, viscosity test should be conducted. 检验 Touchscreen是否贴有背胶, 背胶厚度, 粘性,材质、工艺需要与样品一致; 无实物样品的应进行粘性测试. 5.5 FIRMWARE VERSION 控制卡软件确认: Firmware Version Use a 4-Pin to USB male cable to connect the FPC cable metal terminal connection control card to a computer. Open ILITEK TP Tools , select Console , and then check if the indicated Firmware Version is the current version used by the company. Touchscreen端连接控制卡用4PIN转USB公头线连接到电脑,打开Ilitek TP Tool工具,点击Console,读取版本号,版本要与封样软件一致. Performance Test 性能测试: 5.6 PERFORMANCE TEST Touchscreen/Display/Motherboard/Touch Panel(TP) Control Board Connection Test 触摸屏/显示器/主板/触摸屏 (TP) 控制板连接测试 A. The platform uses an Android motherboard with firmware. Check that the voltage of the motherboard is measured at 3.3V when connected to the display and thecontrol panel board. 搭平台使用安卓主板带有固件,主板屏电压跳帽至3.3V,连接15.6寸显示屏, 屏线连接主板(下接)和显示屏. B. Check that the FPC cable at the TP end is connected to the control card, and it needs to be connected in place. The cable cannot be inserted at an angle or inclined. Touchscreen 端FPC排线连接控制卡,需连接到位,不可插偏, 倾斜. C. Use a 10-Pin reverse cable to connect the control card and the main board with the metal side down. After all connections are completed, check whether there are incorrect connections. The components must not collide. 10 PIN反向线连接控制卡与主板端,下接金属面向下,所有接通完毕检查有无接错, 元器件不可碰撞,确认无误后接通电源开机. D. Star Tool Pre-Aging Test for Touch 开始测试触摸 1. Install the test APK on the motherboard. 主板上安装测试APK 2. Open Star Tool , and then select Burn-In Test . 打开Startool点击老化测试选项 3. Select Test before burn-in . 点击老化前测试 4. Select Touch , select Start Test , and then enter the next item. 点击触摸开始测试进入下一项 5. Check whether the touch line is normal, no disconnection or jumping point. Place your 10 fingers on the touchscreen at the same time to confirm 10-point touch. 触摸划线正常,无断线、跳点,10指同时放在触摸屏上,确认是否为10点触摸. E. Touch Wake Test 触摸唤醒测试 1. Select Settings →Display →Sleep →15 seconds . 打开Setting设置→点击Display→点击Sleep→选择15秒 2. After the screen is completely black, wait for about 10 seconds, and then touch the screen continuously. 待屏幕完全黑屏后等待10S左右 3. Check that the screen display is working normally. 连续点击屏幕显示正常 Label Package 5.7 LABEL PACKAGE 标签包装: After the test is completed, turn off the display, remove the control card and TP cable, and then place the parts carefully back into the package. Attach a qualified label, and then send it back to the warehouse. If a package has an issue, notify the supervisor. ​ 取下控制卡,连接线,将Touchscreen放置箱子内. 貼上合格標籤,而後送到倉庫不良來料區分 , 通知主管. 5.8 SUBMIT REPORT 提交报告: Submit Report Log in to K3 system and fill in the incoming inspection report. K3并填写来料检验报告。

  • CABLE MATERIAL INSPECTION INSTRUCTIONS

    < Back TOUCHSCREEN INSPECTION: Function Specification Inspection Reference Inspection Level Parts for Inspection Inspection Steps 1. Delivery Check 2. Dimensions Check 3. Appearance Check 4. Back Adhesive Inspection 5. Firmware Version 6. Performance Test 7. Label Package PDF CABLE MATERIAL INSPECTION INSTRUCTIONS 触摸屏来料检验操作说明 Use the following instructions to inspect the touchscreen in all sizes. The 15.6 inch touchscreen is used as an example. 使用15.6英寸触摸屏为例检查說明 , 適用於所有尺寸的触摸屏. Function Specification 1. FUNCTION SPECIFICATION 功能介绍 2. INSPECTION REFERENCE 检测判定依据 Inspectiion Reference Refer to the ISO9001-2015 Control Document: Touchscreen Testing Standard (Doc No. GS-QC-WI-15-A4). 参考ISO9001-2015授控文件: 触摸屏检测标准书(编号: GS-QC-WI-15-A4). 3. INSPECTION LEVEL 检测级别 Inspection Level MIL-STD-105E , Level Ⅱ , Critical : 0 Major : 0.65 Minor : 1.5 按MIL-STD-105E表,一般水准Ⅱ,CRI:0 MAJ:0.65 MIN:1.5 Temperature: 20 ~ 30℃; Humidity: 60 ~ 70% RH; Luminous flux: 300~700 LM (LUX) 温度:20~30℃;湿度:60~70%RH;光通量:300~700流明(LUX) Distance: 30~40CM; Angle: perpendicular to the panel, up, down, left, right, rotating 60 degrees. 检验距离:30~40CM;检验角度:垂直于面板,向上,下 , 左,右,转动60度 4. PARTS FOR INSPECTION 检验工具 Parts Inspection Motherboard (Android System) 安卓主板 15.6” IPS display panel 1920 x 1080 15.6 寸显示屏 Display Cable 屏线 10-pin Reverse Touch Cable 反向10PIN TP线 4-pin Connector to USB-A Cable 4PIN转USB公头线材 12V / 5A Adapter 12V/5A适配器 Computer ( Windows system ) 计算机 ( Windows System ) Touchscreen Specification 触控屏规格书 Inspection Steps 5. INSPECTION STEPS 测试步骤 5.1 DELIVERY CHECK 交货检查: Delivery Check Receive the incoming delivery note. Look for the sealed samples and touchscreen specifications and check whether the supplied materials are consistent with the specifications. 收到来料送货单 , 寻找封样及规格书 ,核对来料与样品 ,规格书是否一致. 5.2 DIMENSIONS CHECK 尺寸检验: Dimensions Check Measure the length, width, and height using a caliper. Actual dimensionsmust match with theindicated specifications. The maximum allowable tolerance of the actual dimensions should only be ± 0.1. 尺寸检验:用卡尺测量长, 宽,高尺寸必须符合规格书参数要求,超出公差范围可进行实配确认,同一片玻璃厚溥差为±0.1. 5.3 APPEARANCE CHECK 外观检查: Appearance Check Check if the touchscreen samples have the following issues and refer to the inspection form. 检查触摸屏样品是否有以下问题,并参考检查表 Scratches and dirt on the surface 表面的划痕和污垢 Silk print ink is not normal 丝印不正常 Corners have broken edges 边角有折断的边缘 Metal connection position of FPC cable has oxidation 表面的划痕和污垢 Creases 刮痕 Holes in the lens or mic 镜头,Mic的孔 FPC Cable Damaged 破损 Air Bell 气泡 Camera Hole Deformation 变形破损 Scratched 刮伤 Damaged 破损 背胶检验: 5.4 BACK ADHESIVE INSPECTION Back Adhesive Inspection Check whether TP is pasted with adhesive. The thickness, viscosity, material, and process of adhesion should be consistent with the sample. If there is no physical sample, viscosity test should be conducted. 检验 Touchscreen是否贴有背胶, 背胶厚度, 粘性,材质、工艺需要与样品一致; 无实物样品的应进行粘性测试. 5.5 FIRMWARE VERSION 控制卡软件确认: Firmware Version Use a 4-Pin to USB male cable to connect the FPC cable metal terminal connection control card to a computer. Open ILITEK TP Tools , select Console , and then check if the indicated Firmware Version is the current version used by the company. Touchscreen端连接控制卡用4PIN转USB公头线连接到电脑,打开Ilitek TP Tool工具,点击Console,读取版本号,版本要与封样软件一致. Performance Test 性能测试: 5.6 PERFORMANCE TEST Touchscreen/Display/Motherboard/Touch Panel(TP) Control Board Connection Test 触摸屏/显示器/主板/触摸屏 (TP) 控制板连接测试 A. The platform uses an Android motherboard with firmware. Check that the voltage of the motherboard is measured at 3.3V when connected to the display and thecontrol panel board. 搭平台使用安卓主板带有固件,主板屏电压跳帽至3.3V,连接15.6寸显示屏, 屏线连接主板(下接)和显示屏. B. Check that the FPC cable at the TP end is connected to the control card, and it needs to be connected in place. The cable cannot be inserted at an angle or inclined. Touchscreen 端FPC排线连接控制卡,需连接到位,不可插偏, 倾斜. C. Use a 10-Pin reverse cable to connect the control card and the main board with the metal side down. After all connections are completed, check whether there are incorrect connections. The components must not collide. 10 PIN反向线连接控制卡与主板端,下接金属面向下,所有接通完毕检查有无接错, 元器件不可碰撞,确认无误后接通电源开机. D. Star Tool Pre-Aging Test for Touch 开始测试触摸 1. Install the test APK on the motherboard. 主板上安装测试APK 2. Open Star Tool , and then select Burn-In Test . 打开Startool点击老化测试选项 3. Select Test before burn-in . 点击老化前测试 4. Select Touch , select Start Test , and then enter the next item. 点击触摸开始测试进入下一项 5. Check whether the touch line is normal, no disconnection or jumping point. Place your 10 fingers on the touchscreen at the same time to confirm 10-point touch. 触摸划线正常,无断线、跳点,10指同时放在触摸屏上,确认是否为10点触摸. E. Touch Wake Test 触摸唤醒测试 1. Select Settings →Display →Sleep →15 seconds . 打开Setting设置→点击Display→点击Sleep→选择15秒 2. After the screen is completely black, wait for about 10 seconds, and then touch the screen continuously. 待屏幕完全黑屏后等待10S左右 3. Check that the screen display is working normally. 连续点击屏幕显示正常 Label Package 5.7 LABEL PACKAGE 标签包装: After the test is completed, turn off the display, remove the control card and TP cable, and then place the parts carefully back into the package. Attach a qualified label, and then send it back to the warehouse. If a package has an issue, notify the supervisor. ​ 取下控制卡,连接线,将Touchscreen放置箱子内. 貼上合格標籤,而後送到倉庫不良來料區分 , 通知主管. 5.8 SUBMIT REPORT 提交报告: Submit Report Log in to K3 system and fill in the incoming inspection report. K3并填写来料检验报告。

bottom of page