top of page

INSTALLATION AND SETUP

After selecting the preferred configuration for the display, install the product and set it up for use.

Configurations

CAUTION:  Follow the installation instructions properly to avoid dropping and damaging the display.

CONFIGURATIONS

Nebula Configurations.png

UNPACKING THE BOX

Nebula Unpacking.png

Out of the Box Failure

If you experience an out of box failure (OBF) during installation in relation to missing, incorrect, or defective unit or item, send an email to support@glorystargroup.com and provide a description of the issue. Glory Star will first troubleshoot the problem over phone or video to help resolve the issue. If Glory Star determines that a product or component has to be returned to the factory, it will instruct the customer how to remove the components from the product.

CONNECTING TO POWER

To power up the tablet, perform the following steps:

1. Remove the two screws that secure the back cover lid.

2. Remove the back cover lid.

3. Connect the DC power connector to the DC IN port.

NOTE:  The L-shaped plug should be placed on the left side.

4. Install the back cover lid and secure with two screws.

INSTALLING MODULES

You can install the following modules to the computer tablet:

RFID/NFC – automatically  identifies persons and conducts access management and mobile payments

1D/2D Barcode Scanner – scans printed barcodes and captures data information

bottom of page