INSTALLATION AND SETUP
Select a preferred configuration for the display before installing the product and setting it up for use.
CAUTION: Follow the installation instructions properly to avoid dropping and damaging the display.
CONFIGURATIONS
UNPACKING THE BOX
Out of the Box Failure
If you experience an out of box failure (OBF) during installation in relation to missing, incorrect, or defective unit or item, send an email to support@glorystargroup.com and provide a description of the issue. Glory Star will first troubleshoot the problem over phone or video to help resolve the issue. If Glory Star determines that a product or component has to be returned to the factory, it will instruct the customer how to remove the components from the product.
CONNECTING TO POWER
To power up the tablet, perform the following steps:
1. Remove the two screws that secure the back cover lid.
2. Remove the back cover lid.
3. Connect the DC power connector to the DC IN port.
NOTE: The L-shaped plug should be placed on the left side.
INSTALLING MODULES
You can install the following modules to the computer tablet:
RFID/NFC – automatically identifies persons and conducts access management and mobile payments
1D/2D Barcode Scanner – scans printed barcodes and captures data information
Light Strips – provides status of the tablet in three colors: green, red,and yellow