Search Results

Copyright & Disclaimer Safety Instructions Magnetar Product Overview Magnetar Features Magnetar Product Specifications Windows Platform Android Platform Magnetar Input/Output Ports Magnetar Dimensions Magnetar Label Locations Magnetar Installation and Setup Installing Display to Kiosk Installing Wall Mount Magnetar User Manual PDF DIMENSIONS 10" DISPLAY (WINDOWS) 15.6" DISPLAY (WINDOWS) 21.5" DISPLAY (WINDOWS) 10" DISPLAY (ANDROID) 15.6" DISPLAY (ANDROID) 21.5" DISPLAY (ANDROID)

Copyright & Disclaimer Product Overview Downloading Star Tool Features Performing Diagnostics General Functionalities Getting Device Information Installing OTA Update Accessing Source Code Adjusting Screen Brightness and Volume Setting Display Orientation Taking Screenshots Restarting the Device Remotely Unlocking Star Tool Performing Model Specific Tests Light Strips Buttons GPIO UART Wiegand Interface Sensors RS485 Input Port 1&2 Camera RFID Configuring Add-on Modules Barcode Modules Camera RFID Light Strips Performing Aging Tests Pre-Aging Test W-Fi HDMI Screen Display Gyroscope Network USB Touch Buttons Bluetooth SD Port Speaker Photo & Recording Aging Test Star Tool 1.6 User Manual PDF STAR TOOL PRODUCT OVERVIEW Star Tool is an open-source APK file that provides diagnostic and functional tests for Glory Star devices. It checks whether the product’s hardware or software is working properly. Star Tool is also designed for developers to use in customizing the displays and modules. Using the tool, the hardware can be configured using the developer’s software platform. DOWNLOADING STAR TOOL Star Tool is available for download from Staros 10.2.1 version. To download Star Tool, follow these steps: 1. Launch the Staros app, 10.2.1 version. 2. Select Settings --> More . 3. Select Star apps . 4. From the StarTool app, select Download and Install . The app will begin to download. FEATURES Kiosk function testing Check and test brightness, volume, orientation, firmware number, Wi-Fi, OTA, reboot, and take screenshots. Choose your model Star Tool is supported on Jarvis, Nebula, Vega X, Epsilon, Infinitus, and Magnetar Android series. Open Source Star Tool is open source which allows complete control over the display. Modules performance Test module functions, such as barcode scanning, controlling light modes, orientation of cameras, and RFID scanning standards. Supported Standards Supports a wide range of RFID and Barcode standards, including HID, Mifare, QR Code Scanning, and etc. PERFORMING DIAGNOSTICS Select a diagnostic test to perform to check if there are any issues with the display. • General functionalities – tests the common features in all devices. • Add-on modules – tests the add-on modules installed on the device. • Module specific – tests specific components of a specific model. • Aging tests – tests the efficacy of the different features and components of the product.

Copyright & Disclaimer VegaOS Overview Accessing the App Accessing through Touchscreen Device Accessing through Web Console Updating Web Console Login Details Configuring General Settings Viewing Basic Information Setting the Device Name Selecting a Language Updating VegaOS and Firmware Version Exporting System Logs Updating the Display Settings Adjusting the Screen Brightness Setting Time or Time Zone Setting the Screensaver Assigning Light Strip Colors Adding App Shortcuts Synchronizing Time Adjusting the Sound Settings Adjusting the Volume Setting the Ringtone Configuring the Dial & Call Settings Downloading or Clearing Call Logs Setting the Call Settings Registering the SIP Server Setting Do-Not-Disturb Mode Updating the Contacts Viewing and Editing Contacts Adding New Contact Adding Robin Group Enabling Camera Monitoring Installing Third Party App Registering Device to Star Control Creating QR Code VegaOS PDF VEGAOS INDOOR ADMINISTRATOR GUIDE PRODUCT OVERVIEW Use the VegaOS Indoor app to configure your Vega Gen 2 indoor touchscreen to set your preferred call, display, sound, contacts, and monitoring settings. The configurations apply to the VegaOS 1.5.5 version and provide information in configuring the functions and features of the VEGA Gen 2 series. You can access the app through the device directly or through the web console. The following functions can only be configured through the web console: • Enabling Camera Monitoring • Updating Ringtone • Installing Third Party App • Uploading Media • Exporting Contact List • Downloading Call logs After updating a specific setting, select Save Changes to set the settings for your device. Access VegaOS Indoor App Update Display Settings Configure the General Settings Adjust the Sound Settings Configure Dial and Call Settings Enable Camera Monitoring Register Device to Star Control Update Contacts Install Third Party App Create QR Code

Glory Star Online Help Welcome to the Glory Star Online Help site! Browse through the different user manuals of the Glory Star products and access the latest documentation and references to help you set up your device easily. Installation Instructions Each user manual includes a step-by-step installation procedure for the different configurations available for the product. Features and Product Specifications You can conveniently check the different features and the specifications of each product so you can compare which would suit your business needs. Troubleshooting Troubleshooting tips and FAQs will be added to guide you in resolving issues.

Copyright & Disclaimer Vega X Safety Instructions Vega X Product Overview Vega X Features Vega X Product Specifications Vega X Input Output Ports Vega X Label Locations Vega X Dimensions Vega X Installation Mounting Options Vega X Unpacking the Box Performing Pre-Installation Tasks Mounting the Device to the Wall Vega X User Manual PDF PRODUCT OVERVIEW Vega X Intercom System secures premises and only allows approved personnel to access private areas of the building. Residents and authorized personnel can access the building using PIN codes, RFID keycards, or facial recognition. Areas or assets that need limited accessibility or require monitoring will benefit from installing a smart intercom system. Using the Vega X Intercom System, one can seamlessly gain access to doors with convenience. The intercom system can operate any time of the day as a plug and play solution. FEATURES Stable video calling Allows you to see who is at the door and to unlock the door from the inside using a Vega console. No phone wiring required Eliminates the need for additional wiring with no phone wiring required, reducing installation costs. Micro USB updates Updates firmware using Micro USB. API third party integration Allows third-party software integrations for customizations. Vega X runs in Android operating system with an open platform. SIP/IP calling via POE Supports SIP/IP calls. A single POE cable provides both data connection and power to devices such as wireless access points, IP cameras, and VoIP phones. Identify and track via RFID Supports use of RFID keycards. Functional gate control Helps you monitor the traffic and keep a track of all people entering and exiting the property, providing entry records. Increases your property value and elevates your convenience level. Tempered touch glass Reduces glare, decreases fingerprint marks, provides matte finish, and requires little cleaning because of non-adhesive backing with zero sticky residue. The capacitive touch screen allows you to touch the screen while wearing gloves. PRODUCT SPECIFICATIONS

Copyright & Disclaimer Vega X Safety Instructions Vega X Product Overview Vega X Features Vega X Product Specifications Vega X Input Output Ports Vega X Label Locations Vega X Dimensions Vega X Installation Mounting Options Vega X Unpacking the Box Performing Pre-Installation Tasks Mounting the Device to the Wall Vega X User Manual PDF VEGA X INTERCOM SYSTEM User Manual PRODUCT OVERVIEW Vega X Intercom System secures premises and only allows approved personnel to access private areas of the building. Residents and authorized personnel can access the building using PIN codes, RFID keycards, or facial recognition. Areas or assets that need limited accessibility or require monitoring will benefit from installing a smart intercom system. Using the Vega X Intercom System, one can seamlessly gain access to doors with convenience. The intercom system can operate any time of the day as a plug and play solution. Learn More on Features and Specifications INSTALLATION & SETUP Select a preferred configuration for the display before installing the product and setting it up for use. CAUTION: Follow the installation instructions properly to avoid dropping and damaging the display. MOUNTING OPTIONS Learn How to Install the Device

Copyright & Disclaimer Safety Instructions Magnetar Product Overview Magnetar Features Magnetar Product Specifications Windows Platform Android Platform Magnetar Input/Output Ports Magnetar Dimensions Magnetar Label Locations Magnetar Installation and Setup Installing Display to Kiosk Installing Wall Mount Magnetar User Manual PDF INSTALLATION AND SETUP After selecting the preferred configuration for the display, install the product and set it up for use. CAUTION: Follow the installation instructions properly to avoid dropping and damaging the display. CONFIGURATIO NS UNPACKING THE BOX OUT OF THE BOX FAILURE If you experience an out of box failure (OBF) during installation in relation to missing, incorrect, or defective unit or item, send an email to support@glorystargroup.com and provide a description of the issue. Glory Star will first troubleshoot the problem over phone or video to help resolve the issue. If Glory Star determines that a product or component has to be returned to the factory, it will instruct the customer how to remove the components from the product. INSTALLING DISPLAY TO KIOSK To install the display to the kiosk, follow these steps: 1. Lay the display face down on a flat surface. CAUTION : Always use a soft material, cloth or foam, to protect the display when placing the screen face down. 2. Connect the DC power connector to the DC IN port. 3. Plug in the cables in the corresponding ports. 4. Route the cables out through the slots in the function cover. NOTE: Avoid pinching the cables; ensure to properly tie the cables. 5. Install the function cover and secure it with M3 screws. 6. Install a fixed bracket on each side of the 10.1 inch display and on all four sides of the 15.6 inch display. Secure the fixed bracket with M3 screws. 7. Attach an adjustable bracket on each fixed bracket. Secure the adjustable bracket with M4 screws. 8. Loosen and slide the M4 screws on each bracket to adjust according to the depth of the kiosk. 10.1 INCH 15.6 INCH 10.1 INCH 15.6 INCH 10.1 INCH 15.6 INCH 9. Mount the display on the kiosk. 10. Continue to adjust the depth of the display as needed. 11. Secure the brackets on the kiosk with screws. 12. Plug the AC power adaptor into a power source to turn on the display. INSTALLING WALL MOUNT You can purchase the Wall Mount accessory to mount the display on a concrete or wooden wall. To mount the display on the wall, follow these steps: 1. Disconnect the AC power adaptor from the power source to turn off the display. 2. Lay the display face down on a flat surface. CAUTION: Always use a soft material, cloth or foam, to protect the display when placing the screen face down. 3. Mount the monitor bracket at the back of the display. Secure the bracket with four M4x12 bolts and washers. 4. Place the wall plate on the wall and mark the four mounting holes. 5. Perform one of the following: • For a concrete wall, drill four 8 mm holes on the concrete wall, and insert an anchor into each hole. • For wooden mount, drill two 3.8 mm holes on the wood, and insert an anchor into each hole. 6. Align the wall plate with the mounting holes. Secure the plate to the wall with lag bolts and log bolt washers. CONCRETE WALL WOODEN WALL 7. Align the display with the wall plate, and then carefully slide down the display until the bracket is safely secured to the wall plate. 8. Secure the bracket to the wall plate with two M5x15 bolts and M5 washers. 9. Plug the AC power adaptor into a power source to turn on the display.

Copyright & Disclaimer Safety Instructions Vega In-Wall Product Overview Vega In-Wall Features Vega In-Wall Product Specifications Vega In-Wall Dimensions Vega In-Wall Installation and Setup Vega In-Wall User Manual PDF VEGAOS INDOOR DIMENSIONS INPUT/OUTPUT PORTS LABEL LOCATIONS

PRODUCT OVERVIEW Copyright & Disclaimer Safety Instructions E-Paper Product Overview E-Paper Product Specifications E-Paper Input/Output Ports E-Paper Dimension E-Paper Label Location E-Paper Installation E-Paper Powering Device E-Paper Installing the Wall Mount E-Paper Enabling Wi-Fi Mode E-Paper Updating Device Images E-Paper Pushing Images via StarControl E-Paper Display User Manual The Glory Star E-Paper Display offers a vibrant, energy-efficient digital signage solution in two sizes: 13.3" and 31.5". Utilizing E-Ink technology, these displays deliver a paper-like viewing experience with exceptional clarity and minimal power consumption. Ideal for various applications, from public information displays and menu boards to corporate dashboards and retail signage, the Glory Star displays provide a modern and eco-friendly alternative to traditional signage. Glory Star E-Paper Display utilizes E-lnk technology, ensuring a high-quality, readable, and energy-efficient display. PRODUCT SPECIFICATION INPUT/OUTPUT PORTS DIMENSION LABEL LOCATION

NEBULA TOUCHSCREEN COMPUTER FIRMWARE UPDATE Copyright & Disclaimer Nebula Touchscreen Overview Nebula Input/Output Port Nebula Firmware Update through PC Part# 399/568/576 Part# 133 Part# 225 Nebula Firmware Update through USB Part# 399/568/576 Part# 133 Part# 225 Nebula Touchscreen Firmware Update PDF The Nebula Plus computer tablet is the next generation of tablets for industry use. It comes with a curved edge touch glass. It has the most versatile application for rigorous and continuous public use of self service, corporate, healthcare, in-store interaction, and hospitality environments. The RFID, barcode reader, light strips, and camera modules can be attached to Nebula Plus to enhance your user experience. The voice quality has been improved to avoid surround noise when using next-generation voice control activations. Nebula Plus combines commercial-grade reliability with the powerful Hexacore processor, PCAP 10-touch display, Android 12.0, StarOS 10.2.1, and optional Power-over-Ethernet (POE) – all in a compact responsive all-in-one (AiO) computer. StarOS, our license-free kiosk lockdown app, is inclusive with Nebula Plus. Star Control, a secure platform, could be added as an option to remotely access the tablets for content and device management. INPUT/OUTPUT PORT FIRMWARE UPDATE THROUGH PC PART# 399/568/576 To update the firmware version on the display, follow these steps: Install DriverAssitant_v5.1.1 to your computer. Copy RKDevTool_Release_v2.93 and Update(XXXXXX.img) to your computer. Double-click RKDevTool.exe to launch the app. Select the Upgrade Firmware tab. 4. Select Firmware, and then select the update file(XXXXXX.img) to install from your computer. 5. Connect your computer to the display using a Type A to Type C cable. 6. From the display, press and hold the Vol + button, and then connect to power through the DC IN port. 7. The app prompts that a loader device is found. If not, repeat steps 4-5 again. 8. Select the Upgrade tab. The update will automatically run, and then the display will restart once update is completed. NOTE : To download the RKDevTool_Release_v2.93 and firmware, contact us at https://www.glorystartouch.com/support . PART#133 To update the firmware version on the display, follow these steps: Copy PhoenixSuit V1.19 and Update(XXXXXX.img) to your computer. Right-click Phoenixinstall and choose to run as an administrator. Install the device driver in your computer. Double-click PhoenixSuit.exe to launch the app. Select the Firmware tab. 6. Select Wipe part . Select Image , and then select the update file (xxxxx.img) to install from your computer. 7. From the display, connect your computer to the display using Type A to Type C cable. 8. Press and hold the Audio Jack inside Recover button using a small pin. 9. Connect to power through DC In. 10. When the device is connected, the update will automatically run, and then the display will restart once update is completed. NOTE : To download the PhoenixSuit V1.19 and firmware, contact us at https://www.glorystartouch.com/support . PART#225 To update the firmware version on the display, follow these steps: Install the qud.win.1.1_installer_10065.1 USB driver to your computer. Install qpst.win.2.7_installer_00496.1 and copy Update(XXXXXX.img) to your computer. Double-click QFIL.exe to launch the app. From the display, connect your computer to the display using Type A to Type C cable. Press and hold the Audio Jack inside Recover button using a small pin. Connect to power through DC In. 7. Select Select Port → Qualcomm HS-USB QDLoader 9008 (COM3) , and then select OK. 8. Select Flat Build → Browse , and then select the update file (prog_firehose_ddr.elf) to install from your computer. 9. Select Load XML → rawprogram0_split → patch0 . 10. From Storage Type, select ufs . 11. Select Download . The upgrade will automatically run. 12. Once the Status displays Finish Download , manually restart the device to complete the update. NOTE : To download the QFIL.exe and firmware, contact us at https://www.glorystartouch.com/support . FIRMWARE UPDATE THROUGH USB PART# 399/568/576 To update the firmware version on the display, follow these steps: Copy the update.zip file to a USB drive (FAT32 format). Don’t extract the file, just copy the file. Turn on device, and then connect the USB drive to the display. 3. Once the Firmware Updating pop-up window displays, select Install. The update will automatically run, and then the display will restart once update is completed. PART# 133 To update the firmware version on the display, follow these steps: Copy Update (XXXXXX.zip) to your micro SD card. Insert the micro SD card into the device and turn on the display. From the display, go to System → Local Update . 4. Select OTA System Update . 5. Select the Update (XXXXXX.zip) file. The update will automatically run. 6. Once update is completed, select Yes to reboot the display. PART# 225 To update the firmware version on the display, follow these steps: Copy the update.zip and update.json files to a USB drive (FAT32 format). Don’t extract the file, just copy the file. Turn on device, and then connect the USB drive to the device. Copy the update.zip and update.json files to the devices 4. Select All applications → Systemupdater Sample . 5. Select Apply , and then select OK . The update will automatically run. 6. Wait for system update. The system indicates that the update is a success. 7. Manually restart the device to complete update. NOTE : To download the AndroidTool_Release and firmware files, contact us at https://www.glorystartouch.com/support .

Copyright & Disclaimer Safety Instructions Vega In-Wall Product Overview Vega In-Wall Features Vega In-Wall Product Specifications Vega In-Wall Input/Output Ports Vega In-Wall Label Locations Vega In-Wall Dimensions Vega In-Wall Installation and Setup Vega In-Wall User Manual PDF VEGAOS INDOOR VEGA GEN 2 IN-WALL INDOOR TOUCHSCREEN User Manual PRODUCT OVERVIEW The Vega 10-inch Indoor Touchscreen is the ultimate solution for touch control in homes and commercial spaces. The device can be used for a wide range of applications, including digital intercom, patient monitoring communication, classroom management, room automation, guest communication, and emergency notifications. It features dual microphones for enhanced noise cancellation and has a loud 2 x 2W speaker for intercom use. The device also supports Vega OS and Star OS, Intercom, and kiosk lockdown software, as well as third-party apps. Learn More on Features and Specifications INSTALLATION & SETUP Select a preferred configuration for the display before installing the product and setting it up for use. CAUTION: Follow the installation instructions properly to avoid dropping and damaging the display. CONFIGURATIONS Learn How to Install the Device

PRODUCT OVERVIEW Nebula Kiosk Tablet is designed as an all-in-one self-service kiosk. The tablet combines commercial grade reliability with a powerful processor and an optional Power over Ethernet (POE). The kiosk tablet offers a wide variety of optional peripherals, such as magnetic card swipe, RFID/NFC, and barcode reader enabling flexibility for rigorous and continuous public use of fitness consoles, system terminals, retail e-catalog, employee access control, corporate check-in, restaurant self-ordering, hotel check-in, and etc. The kiosk tablet is engineered for commercial environments with a supported 3-year warranty. The kiosk tablet runs Android 9.0 OS, developed for fixed applications, with no battery power included. A license-free kiosk lockdown app is installed in the Nebula kiosk tablet, offering high-level of customization that allows customers to integrate tablets, such as touch screens, to your IOT products. Copyright & Disclaimer Safety Instructions Nebula Product Overview Nebula Product Specifications Nebula Features Nebula Dimensions Nebula Input/Output Ports Nebula Label Locations Nebula Installation and Setup Configurations Unpacking the Box Connecting Power RFID/NFC 1D/2D Barcode Scanner Mount STAROS STAR TOOL STAR CONTROL Nebula User Manual PDF FEATURES Durable, built to last Optional POE API third-party integration 4G Capability Easy cable management PRODUCT SPECIFICATIONS NES150 ALU210 ACCESSORIES AND OPTIONS INPUT/OUTPUT PORTS 15.6" DISPLAY 21.5" DISPLAY DIMENSIONS 15.6" DISPLAY 21.5"DISPLAY 15.6"DISPLAY WITH FIX-028 TABLE MOUNT 15.6"DISPLAY WITH FIX-030 TABLE MOUNT LABEL LOCATIONS 15.6" DISPLAY 21.5" DISPLAY